IPX5 IPX6防水測試 Spray Hose Nozzle Tester#技術規格

手持防噴水試驗裝置是依據標準IEC60529 IPX5/6、GB4208 IPX5/6等標準的相關條款要求制作，用于對檢驗具有防淋雨功能的器具或電器的防水性能進行測試。噴頭采用不銹鋼精密燒焊制成，適用于可能受到各種沖水或猛烈海浪影響的產品。

功能參數：

1、 適用于進行產品的IPX5、IPX6測試。

2、 孔徑：ф6.3mm（IPX5）、ф12.5mm（IPX6）。

3、 IPX5、IPX6噴嘴螺紋聯接、快速更換。

4、 不銹鋼材質。

5、 水流量：12.5±0.625L/min(IPX5)、100±5L/min(IPX6)

6、壓力表:0~0.25MPa

7、 試驗時間：不小于1min/m2(但不小于3分鐘)、用戶設定時間（控制系統控制）。

8、 噴嘴距外殼距離：2.5-3m(試驗人員控制)

9、IPX5:需提供水流速率為大于12.5L/min±5%，IPX6需提供水流速率為大于100L/min±5%干凈、無雜質的清水

Specifications

internal diameter of the nozzle:6.3mm

--delivery rate:12.5/min+/- 5%

--water pressure:to be adjusted to achieve the specified delivery rate

--Core of the substantial stream:circle of approximately 40mm diameter at 2.5 distance from nozzle

--Test duration per square meter of enclosure surface area likely to be sprayed :1mm

--Minimum test duration :3min

--Distance from nozzle to enclosure surface:between2.5 and 3m

Test Set consists of a jet handle that is equipped with a pressure gauge and an easy-to-adjust flow valve.The interchangeable nozzles assemble easily to the jet handle.

The nozzles are made from stainless steel.

Include: Pressure gauge.

Flowmeter.

Stainless steel nozzle.

Valve for water flow regulation and shut off.